Skip to main content

Review and Approve Count Details

info

This page describes procedures for environments using Inventory Management (New Method).

If your screen layout differs from the one shown on this page, see the Inventory Management (Conventional Method) manuals.

Overview​

This manual explains how to check the difference between the quantities counted and theoretical stock and approve the count results.

Review the count details, take any necessary action, and approve the results to update stock.

Purpose​

Before applying the count to stock, you can check the difference between the quantities actually counted and theoretical stock.

You can review unentered rows and rows with differences, and recount or record additional information as needed.

Feature Description​

What Is Count Review?​

During count review, count quantities are compared with the theoretical stock recorded during count session preparation. You can check differences, record reasons or notes, and send the count back for recounting as needed.

Count quantities are recorded in count rows for each combination of information such as location, SKU, and lot. Even for the same SKU, count rows are separate when the lot or inventory segment differs.

The difference is the count quantity minus the theoretical stock quantity.

For details about inventory counting, see the following manuals.

Actions During Review​

You can review the count details and take the following actions as needed.

  • Handle unentered rows: Record them as zero without counting, or send them back for recounting and enter the quantities.
  • Register unit costs: Check and save unit costs for rows that require them.
  • Check differences: Compare count quantities with theoretical stock and record reasons or notes as needed.
  • Check reference valuation: Record a reference amount for rows that need to be checked, if needed.

To correct count quantities, send the count back for recounting. Previously entered count quantities remain after it is sent back.

Unit Cost​

The unit cost is the cost per additional item counted above theoretical stock. Required unit costs are used to reflect the cost of the increase in stock when the count results are approved.

For rows that require a unit cost, check and save the cost before approval.

You can find the rows requiring input under Rows requiring a unit cost on the review screen.

Depending on the conditions, the current moving-average unit cost appears as the default. A displayed default may not yet be saved, so check and save it.

Depending on the conditions, you can check the theoretical asset value, counted asset value, and difference in asset value for each count row.

Reference Valuation​

Reference valuation is information used to check and record count details in monetary terms as well as quantities.

In Asset amount (manual entry), enter the reference amount for the entire quantity in the target count row.

Entering a reference valuation does not replace the unit cost required for approval. It also does not change the actual stock cost to the entered amount.

An unresolved reference valuation alone does not prevent approval of the count results.

Viewing Review Details​

You can switch which count rows appear in the list according to what you want to review.

  • All rows: Displays all rows regardless of differences or entry status.
  • Rows with difference only: Displays rows with an entered count quantity that differs from theoretical stock.
  • Uncounted: Displays rows without a count quantity.
  • Rows requiring a unit cost: Displays rows requiring a unit cost that has not yet been saved.
  • Reference valuation (does not block approval): Displays rows requiring a reference valuation check.

Approving Count Results and Updating Stock​

Closing the count and starting review does not change stock quantities in the system.

When count results are approved, an inventory adjustment is made for the difference from the recorded theoretical stock, and that difference is applied to stock at the time of approval. If there is no difference, approval is completed without creating an inventory adjustment.

Viewing Count Results​

You can check approved count results on the Results tab.

You can check the confirmation date and time, total difference, and number of skipped locations, as well as the theoretical stock, counted quantity, and difference for each count row. You can also change the display to view rows with differences.

If an inventory adjustment was created when the count results were approved, you can check the inventory adjustment document under Inventory adjustments created by this count.

Count result quantities are fixed at the time of approval and do not change if stock is adjusted afterward.

You can also export approved count results in Excel or CSV format. For details, see Export Count Results (Excel and CSV).

Instructions​

After closing the count, review the details and approve them. Address unentered count rows and unit costs as needed.

Navigate to the Count Review Screen​

  1. Click the Inventory menu.

  2. Click the Counting tab.

  3. Search
    Enter search criteria to narrow down the count sessions.

  4. Open the target count session.

    • To start review: Click the Proceed with count button.
      The "Count session details" page opens.
    • To resume review: Click the Proceed with review button and continue to Review the Count.
  5. Check the status and entry progress of the count target locations, the number of completed locations, and other details.

    tip

    Before closing the count, you can also click the Review tab to check count details.

    Enter unit costs, difference reasons, and other information after closing the count.

    After checking, return to the Details tab.

  6. Click the Close count and start review button.
    The "Confirm closing this count" modal appears.

  7. Review the details and click the Close and start review button.
    The count review screen opens.

    You can close the count and proceed to review even if there are unentered count rows. Unentered rows are not recorded as zero and can be checked on the review screen.

Review the Count​

Read About the Review Screen and proceed to the necessary actions.

info

Check Before approving the count and address any items requiring attention first.

You cannot approve the count results while required actions remain.

About the Review Screen​

On the review screen, you can check count details and actions required before approval.

  1. Check differences in count quantities, entry status, and skipped locations.

    • With difference (entered rows): Check the number of rows where count quantities differ from theoretical stock and the total difference in quantity.
    • Not entered: Check the number of rows without a count quantity.
    • No difference: Check the number of rows where count quantities match theoretical stock.
    • Count difference breakdown: Check stock shortages or excesses and differences in location.
    • Skip: Check the number of skipped locations.
  2. Under Before approving the count, you can check the status of unentered rows and rows requiring unit costs. When you click each button, rows requiring action, if any, appear in the list.

    If no action is required, There are no tasks before approval. is displayed.

    • Uncounted: Check the number of remaining unentered rows and the numbers completed and in scope.

      Click the Review uncounted rows button to display unentered rows.
      For details, see Check Unentered Count Rows.

    • Rows requiring a unit cost: Check the number of remaining rows requiring unit costs and the numbers completed and in scope.

      Click the Enter unit costs button to display rows whose unit costs have not yet been saved.
      For details, see Check and Register Unit Costs.

  3. If Reference valuation (does not block approval) is displayed, check the instructions on the screen.

    If unit costs need to be registered, follow the steps in Check and Register Unit Costs.

    After required unit costs are registered, details appear if any rows require a reference valuation check.

    If this section disappears, no further reference valuation checks or entries are needed.

  4. Search
    If needed, click Open under Search to filter by model number / SKU, location, or barcode.

    Enter or select criteria and click the Search button.

    info

    Search criteria are retained when switching display options.

    If a number of rows require action but none appear in the list, check the search criteria and click Reset if needed.

  5. Display
    Select a display option from the dropdown. The default is Rows with difference only.

    • All rows
    • Rows with difference only
    • Uncounted
    • Rows requiring a unit cost
    • Reference valuation (does not block approval)

    For display options, see Viewing Review Details.

    When All rows or Rows with difference only is selected, enable the Show detail columns toggle to see additional fields such as barcode, inventory disposition, and asset values.

Check Unentered Count Rows​

If there are rows without a count quantity, record them as zero without counting or send them back for recounting and enter the quantities.

  1. Click the Review uncounted rows button under Before approving the count, or select Uncounted from the Display dropdown.
    Rows without count quantities appear in the list.

  2. Check the product / SKU, location, theoretical stock, and other details of the target rows.

  3. Choose whether to send them back for recounting or record them as zero without counting.

    To count and enter quantities
    See Send Back for Recount.

    To record as zero without counting

    • All unentered rows: Click the Record all uncounted rows as zero without counting button.
    • By location: Click the button for the target location. The button shows the location name and number of unentered rows.
    • By unentered count row: Click Record this row as zero without counting for the target row.

    Clicking any of these buttons opens the "Record as zero without counting?" modal. Check the target and details, then click the Confirm button.

    tip

    To undo a zero count, click the Undo zero records button displayed after recording it.
    Review the confirmation screen and click the Undo zero records button to return the rows most recently recorded as zero to the unentered state. Rows for which quantities were entered afterward do not return to the unentered state.

Check and Register Unit Costs​

For rows that require unit costs, check and save the costs.

To enter unit costs in bulk, see Enter Unit Costs by Importing an Excel File.

  1. Click the Enter unit costs button or select Rows requiring a unit cost from the Display dropdown.
    Rows whose unit costs have not yet been saved appear in the list.

  2. Check the unit costs for the target rows and enter or correct them as needed.

    Depending on the conditions, the current moving-average unit cost appears as the default.
    A displayed unit cost may not yet be registered. Check and save it even if you use it without changes.

  3. Click the Save inputs on this page button.
    Pending entries on the current page are saved.

    If target rows also appear on other pages, check and save each page.

    tip

    Before saving, unsaved inputs shows the number of count rows with entries waiting to be saved.
    This includes automatically populated unit costs.

    After saving, click the View saved contents button to check the unit costs, reasons, and other information saved for the count rows.

    The button disappears when you switch display options, so check before switching if necessary.

    You can check or change saved unit costs using views such as All rows and Rows with difference only.

Enter Unit Costs by Importing an Excel File​

  1. Click the Enter unit costs button or select Rows requiring a unit cost from the Display dropdown.
    Rows whose unit costs have not yet been saved appear in the list.

  2. Click the Bulk unit cost import button.
    The "Bulk Unit Cost Import" modal appears.

  3. Click the Download template button.
    The Excel template is downloaded.

  4. Open the downloaded Excel template.

    The template contains count rows requiring unit costs across the entire count session.

    • Rows whose unit costs have not been saved: Base Unit Cost is blank. An unsaved cost is not included, even if a default is displayed on the screen.
    • Rows whose unit costs have been saved: The saved cost appears in Base Unit Cost.

    The template also includes saved rows that do not appear in the Rows requiring a unit cost list.

  5. Enter Base Unit Cost for the rows to register or update.

    Count rows with different locations or lots are output separately, even for the same SKU. Check the target rows before entering values.

    • Entering 0 registers a unit cost of 0.
    • Unregistered rows with a blank unit cost remain in Rows requiring a unit cost.
    • The file cannot be imported if Base Unit Cost is blank for every row.
    info

    For rows with saved unit costs, the saved costs are replaced with the values entered in the file.

    Leave Base Unit Cost blank for rows you do not want to change. Blank rows are excluded from the import, and saved unit costs remain unchanged.

    Information such as SKU and location is used to identify the target row. Do not change any fields other than Base Unit Cost.

  6. Save the file.

  7. Click the Select File button and select the completed Excel file.

  8. Under Check result, check the number of rows that can be imported, errors, and each row's SKU, location, unit cost, and other details.

    If there are errors, check the details, correct and save the file, and select it again.

    * If unit costs or other details change after the template is downloaded, an error may occur during import. In that case, download the template again and enter the unit costs.

  9. If the validation results are correct, click the Import button.
    The number of imported rows is displayed when the import completes.

    Rows with registered unit costs no longer appear in the Rows requiring a unit cost list.

Check Differences and Record Reasons​

Check rows where the count quantity differs from theoretical stock, and record reasons or notes as needed.

  1. Select Rows with difference only from the Display dropdown.
    Rows where the count quantity differs from theoretical stock appear in the list.

  2. Check each target row's product / SKU, location, theoretical stock, count quantity, difference, and other details.

  3. Reason (optional)
    If needed, select a reason from the following dropdown options. The default is Unspecified.

    • Unspecified
    • Unregistered movement
    • Missed receipt
    • Missed shipment
    • Picking error
    • Counting error
    • Damaged or lost
    • Found stock
    • Master data issue
    • Unknown
  4. Memo
    Enter a note if needed.

  5. Check the unit costs displayed on the current page.
    For rows with a unit cost input field, you can also change the cost on this screen if needed.

    *If you enter a reason or note, any unregistered unit costs populated by default on the same page are saved together.

  6. Click the Save inputs on this page button.
    Pending entries on the current page are saved. If you entered information on other pages, save each page.

    tip

    Before saving, unsaved inputs shows the number of count rows with entries waiting to be saved.
    This includes automatically populated unit costs.

    After saving, click the View saved contents button to check the unit costs, reasons, and other information saved for the count rows.

    The button disappears when you switch display options, so check before switching if necessary.

Check Reference Valuation​

If any rows require a reference valuation check, you can review them and record a reference amount as needed.

  1. If unit costs need to be registered, see Check and Register Unit Costs and register the required costs.

  2. Select Reference valuation (does not block approval) from the Display dropdown.
    Rows requiring a reference valuation check, if any, appear in the list.

    If no rows require checking and no rows have a manually entered reference valuation, the section above is not displayed. In this case, no additional reference valuation action is required.

  3. If rows requiring checking appear, check the Reason valuation cannot be calculated for each target row.

  4. To enter a reference amount, enter it in Asset amount (manual entry) for the target row.
    Enter a reference amount for the count row's entire quantity, not a unit cost or an amount for the difference alone.

  5. If you entered a reference amount, click the Save inputs on this page button.

    A row may remain in the list as requiring a check after saving if information needed for valuation is missing or for other reasons.

    Even if the row remains in the list, you can check the saved amount under Asset amount (manual entry) in All rows or Rows with difference only.

    To change a saved reference amount
    Display the target row in All rows or Rows with difference only, and click Change under Asset amount (manual entry). Correct and save the amount on the screen that appears.

Send Back for Recount​

  1. Click the Return to counting button.
    The "Return to counting?" modal appears.

  2. Review the details and click the Return to counting button.
    The count session returns to Counting, and count quantities can be entered again.

    For details on how review details are handled when quantities are recorded again, see Review Details After Recounting.

Approve Count Results​

Approval cannot be undone. Check the details before approving.

  1. Check Before approving the count and address any items that require attention, such as unentered count rows or required unit costs.

  2. Check that no review entries are unsaved.

  3. Click the Approve count results button.
    The "Count result approval" modal appears.

  4. Check the number of rows where stock will change, the total difference, and other details, then click the Approve button.
    When approval is complete, the status changes to Approved, and count results appear on the Results tab.

    You can check count result details on the results screen.
    If an inventory adjustment was created, click the document number under Inventory adjustments created by this count to check its details.

Important Notes​

Before Starting Review​

To start review, confirm that the count session is Counting and that no count records requiring confirmation remain.

Once the count is closed and review starts, count quantities can no longer be entered. Check the team's work status and confirm entries are saved before closing. To correct quantities, send the count back for recounting.

Recording Unentered Count Rows as Zero​

Recording a row as zero without counting records its count quantity as zero. If theoretical stock exists, that quantity becomes a negative difference.

When targeting all unentered rows in the session, the action is not limited to search results or the current page. Check the target scope and number of rows before proceeding.

When recording by location, the action also applies to the target location's unentered rows.

Saving Review Details​

Entries made during review are not saved automatically. Save each page.

When saving, unregistered unit costs populated by default are saved along with manually entered details. Check the displayed unit costs before saving.

Unsaved entries may be discarded when switching search criteria, pages, or other settings.

Before Approval​

Approval applies to the entire count session even when the list is filtered. Even if the total difference is zero, increases and decreases may offset each other, so check each row.

An unresolved reference valuation alone does not prevent approval. However, a reference valuation cannot replace a unit cost required for approval.

After approval, you cannot return to normal count entry or review to edit the details. Check them before approving.

Excel Import of Unit Costs​

Hidden identification information in the template is used to identify the destination count rows.

Do not change it or copy it from another row. Doing so may cause an error or an incorrect import into another count row.

Review Details After Recounting​

Sending the count back for recounting alone does not delete saved review details. However, for rows where count quantities are recorded again, previously saved difference reasons, notes, unit costs, and manually entered reference valuations are deleted. Check and enter the necessary information when reviewing again.

When importing count quantities from Excel, saved review details are also deleted for rows with quantities entered and imported, even if the quantities are unchanged.